General purpose photopolymer LCD resin, specifically engineered to work with the Lotus EZ 3D Printer.
79 in stock (can be backordered)
The new Lotus Resin is a general purpose photopolymer LCD resin, which is specifically engineered to work with our Lotus EZ 3D Printer. The resin is almost odourless and allows you to 3D print objects with extremely high accuracy and relatively short curing times.
Resin properties (uncured liquid)
Test method on post cured objects through 30 minutes high power LED curing
|Properties||Typical Value||Test Method|
|Glass transition temperature (Tg)||51° C||ASTM D7028|
|Water absorption||0.4%||ASTM D570-98|
|Impact strength (IZOD notched)||18 J/m||ASTM D256A|
|Tensile strength||45 MPa||ASTM D638M|
|Tensile Modulus||1.0 GPa||ASTM D638M|
|Elongation at break||8%||ASTM D638M|
|Flexural Strength||66 MPa||ASTM D790M|
|Flexural Modulus||1.8 GPa||ASTM D2240|
|Shore D Hardness||82||ASTM D2240|
Preparation(s) before starting to print
o The resin can be poured back from the vat into the bottle once your print is finished
General printing guidelines
Base Curing Times at 50 micron for Lotus Resin – Red (Transparant): 13sec
We do advise to post process your 3D print in order to achieve the material properties.
Please always be aware that when 3D printing with resins that you are working with chemicals and that you should always be cautious and use the personal protective equipment as stipulated in our safety data sheets.
Product export information
|HS Code: 2916140090||Description: Resin for 3D Printing||Country of origin: the Netherlands|